Description
-
Power Output Level 20Hz 20kHz THD+N=0.1% 😯 70V/channel RL=24. 200W x 2 4O 70V/channel RL=24. 200W x 2
-
8 Ohms / BRIDGE 100V/channel RL=48. 200W x 2
-
70V/BRIDGE RL=16 Ohms 100V/channel RL=48. 200W x 2
-
Sensitivity RL=8. Att.max
-
S/N Ratio 20Hz-20kHz(DIN AUDIO)
-
Idle Power Consumption 40W
-
1/8 Power Consumption (4 Ohms) 250W
-
Power Bandwidth (Half power THD+N=0.5%) 10Hz – 40kHz
-
THD+N 20Hz 20kHz, half power 0.1%
-
Intermodulation Distortion 60Hz: 7kHz, 4:1, half power 0.1%
-
Frequency Response f=20Hz-20kHz -0.5dB, 0dB, 0dB 80Hz-20kHz
-
Channel Separation Half power RL=8 Ohms, 1kHz
-
ATT. Max input 600 Ohms shunt 60dB(24 Ohms)
-
Residual Noise 20Hz-20kHz (DIN AUDIO) –65dB
-
Damping Factor 8 Ohms, f=1kHz 100
-
Voltage Gain ATT. max 38dB(100V), 35dB(70V)
-
Maximum Input Voltage 22dB
-
Input Impedance 30 kOhms (Balance) 15 kOhms (Unbalance)
-
Controls Front panel POWER switch (push on/push off), attenuator (31position) x 2
-
Rear panel MODE switch (70V/100V) x 1
-
HPF switch (40Hz/80Hz 12dB/oct) x 1
-
Connectors Input euro-block (balance)/ch
-
Output Barrier strip/ch
-
DATA PORT D-sub15P, Monitor:Output Level/ch,Active/ch,
-
Model Detect Control:Mute/ch
-
Power AC inlet x 1
-
Indicators POWER x 1 (Green)
-
SIGNAL x 2(Green)
-
CLIP/LIMIT x 2 (Red)
-
PROTECT/MUTE x 2 (Red)
-
Load Protection POWER switch on/off mute, DC-fault output relay off
-
Amplifier Protection thermal (heatsink temp =90°C), VI limiter(RL = 16 Ohms)
-
Limiter Circuit clip limiting,THD = 1.0%
-
Cooling/Variable-speed fan stop-50C-variable-70C-Hi
-
Power Requirements UC: 120V / 60Hz, EU: 230V / 50Hz, A: 240V / 50Hz
-
Dimensions (W x H x D) 480 x 88 x 412.2 mm
-
(18-7/8″ x 3-7/16″ x 16-1/4″)
-
Weight 10kg (22 lbs.)